Ricoh Type 480 Manual do Utilizador descarregar pdf (Página 85)

JOB HISTORY

printed automatically. It has to be started manually in the

job list. You can add this priority to a job, for example, if

you want to change the print settings afterwards.

→ Immediately: This is the highest priority level. This priority

can only be set in RW-480 PLOTBASE and RW-480

SCANTOOL. The current print job will be interrupted until

the job with priority "immediately" is done. You can use

this priority, if you want to print out a scanned drawing

immediately (copy function).

The following chapter describes how you can alter the

priority.

• Job status:

This job characteristic can be used to obtain information

about possible problems or plot errors during the job

concerned. The different status conditions are listed below.

Behind each status condition you can find an explanation

and the color which is shown in the Job list:

(black)

The job has been printed.

Preparing data The job is prepared for printing.

(dark green)

Pending

(blue)

The job is ready for printing.

Plotting

(green)

The job is currently being printed.

Locked Print The job is protected by a password.

(light blue)

Manual

(light blue)

The print job must be started

manually. The job will be processed

by the plotter not before you have

put the medium into the bypass tray.

Wait for the request to do so.

Sample Print A test print is to be made first.

(light blue)

Problem

(red)

There is a problem; the job

was not completed.

Cancel

(red)

The job order has been canceled.

Further information on the status can be obtained by double

clicking on the line of the job concerned with the mouse

cursor. The program opens an info window, which contains

RW-480 PLOTBASE 85

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 233 234

Comentários a estes Manuais

Sem comentários

Ricoh Type 480 Manual do Utilizador Página 85

Comentários a estes Manuais

Manuais e produtos relacionados com Software Ricoh Type 480