Ricoh Type 480 Manual do Utilizador descarregar pdf (Página 114)

JOB EDITOR

"Opaque". There are three possible settings:

Opaque: The stamp overwrites the area of the drawing

beneath it.

Transparent: In the "Transparent" setting the inserted

stamp lies "beneath" the existing drawing, which means

that parts of the stamp can be overwritten.

Inverting: In the overlap between stamp and drawing

displays, the colors are inverted. For example, black

stamp text is then shown in white.

• Stamp placement:

This is where you fix the actual position of the stamp on the

drawing. The frame equates to the drawing, so that you can

choose from the entries for the nine positions from "top",

"centered" to "bottom".

In addition, you can shift this fixed position in the field to the

right of it by a valid size unit. You´ve got to be aware that

you don´t place the stamp outside the drawing because in

that case it won´t be printed or it will be printed only

partially. You set the currently valid size units for RW-480

PLOTBASE in the configuration program and it is displayed

at the bottom of the screen in the status bar.

• Scale position:

With the "Scale position" you determine whether the stamp

always retains its position relative to the edge of the drawing

when the size is changed or whether the distance to the edge

of the drawing is to be enlarged or reduced.

• Enable Frame:

Activate the "Enable frame" field if you want a stamp frame

to be printed. Three default settings can be set for the stamp

frame. Here too, the settings refer to the currently valid size

unit, which you can see in the status bar:

Upper setting – stamp border: With the upper of the

three settings you set the distance of the stamp to the

edge of the drawing.

Middle setting – Stamp content: The middle setting gives

the distance of the stamp content to the stamp frame.

Lower setting: The lower setting is used to fix the

thickness of the stamp frame.

RW-480 PLOTBASE 114

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 233 234

Sem comentários

Ricoh Type 480 Manual do Utilizador Página 114