Ricoh Type 480 Manual do Utilizador descarregar pdf (Página 102)

JOB EDITOR

drawing in a free format of 1.0 % to 999.0 % of the original.

The input field for Y-scaling is automatically filled with the

value of the X-scaling, if you have activated the "Maintain

ratio" option. If you then want to enter the Y-scaling value

independently, you must deactivate the "Maintain ratio"

option. In this case, you must consider that the drawing will

appear distorted.

• Media type and position

Use this menu to select which type of media the drawing is to

be printed on: Don’t care, Plain Paper, Translucent, Film or

Recycled Paper. The selection depends on what roll of

medium you have fed in the plotter. You can use "position" to

adjust the symbolic position on the paper if the picture is to

be printed on a paper format which is much larger than the

drawing size. E.g. if you have a ISO A4 drawing, which is

printed in original size on ISO A1, you can fix here where the

drawing is to be positioned on the larger sheet.

• Cut mode:

If you have not activate this option, the plotter trims the

drawing immediately after the last data has been printed.

This results in optimum paper or medium use, because it

produces the smallest amount of waste.

If you want the printout to always be trimmed to a standard

format, no matter how much space remains unprinted,

activate "Format". The plotter then always trims to the next

larger format. This can be a disadvantage if e.g. a drawing

is only around 0.5 cm larger than a ISO A5 page is printed

on a ISO A4 page and thus almost 50 % of the sheet

remains unused.

• Copies:

You can enter any number of copies between 1 and 999 to

be printed by the job .

• Rotate:

Here you can say whether the drawing is to be rotated or not

during plotting. Rotations of 0°, 90°, 180° and 270° are

possible. When set to "Auto", RW-480 PLOTBASE rotates

automatically if this results in less waste paper.

RW-480 PLOTBASE 102

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 233 234

Sem comentários

Ricoh Type 480 Manual do Utilizador Página 102