Ricoh AP400 Instruções de Operação descarregar pdf (Página 81)

Error & Status Messages on the Control Panel

75

5

Hardware Problem

Ethernet

An error has occurred in the

optional Network Interface

Board.

First, turn off the power

switch and then on. If the mes-

sage appears again, call your

sales or service representative.

Turn off the power switch .

Replace the Network Interface

Board and turn on the power

switch. See “Network Interface

Board Type 2610” in the Setup

Guide.

Turn off the power switch, re-

move the Network Interface

Board and turn on the power

switch.

Note

❒ If you remove the Net-

work Interface Board, you

cannot print over the net-

work. You can send a print

jobs to the printer Only via

a parallel cable connection.

Hardware Problem

HDD

An error has occurred in the

optional Hard Disk Drive.

First, turn the power switch

off and then on, If the message

appears again, call your sales

or service representative.

Turn off the power switch. Re-

place the Hard Disk Drive and

turn on the power switch. See

“Hard Disk Drive Type 2600” in

the Setup Guide.

Turn off the power switch. Re-

move the Hard Disk Drive

and turn on the power switch.

Note

❒ If the Hard Disk Drive is

not installed, you cannot

send the sample print job,

locked print job and

download the font to Hard

Disk Drive using the PS

Utility for Mac.

Messages/Second messages Description Solution

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 211 212

Comentários a estes Manuais

Sem comentários