Back List
How easy is it to install/initialize the SURETE?
Can the LCD panel be used to configure the SURETE?
What are the advantages of having the LCD panel on SURETE?
What will SURETE look like after set to "Reset configuration to factory default" within shutdown options?
What are the default values of major settings of SURETE?
What to do if the administration password of the SURETE is forgotten?
Can the SURETE operating system be upgraded?
How to use the "DIP switch" (S1) located on the SURETE Control Board?
How to use SURETE "Network Recovery Mode"?
How many capacity of memory is the minimum requirement for SURETE?
How to differentiate the different IDE flat and round cables delivered with SURETE and MR-423I pack?
How to set SURETE all configurations back to factory default?
When I use web browser (ex. Microsoft IE) with proxy enabled to manage SURETE, even to upgrade latest firmware. Why did
the web browser show me like "The page cannot be displayed"?
How easy is it to install/initialize the SURETE?
SURETE is specifically designed as a plug & play stand-alone server. It is not necessary for you to install any additional server or
any driver/software application in your client PC. The only thing you have to do is "plug in the network cable and power on
SURETE". Only a few simple steps have to be taken before you can access data from SURETE server.
1. Go to the web-based Admin Home page.
2. Go to "Volume" page to create volumes even folders.
3. Create a share for network share via "Security" page.
4. Assign appreciate permission to these shared volume or folder.
Can the LCD panel be used to configure the SURETE?
Yes, you can manipulate the LCD panel to make some basic settings for the SURETE such as "IP address", "subnet mask",
"default gateway", "time/date" and so on.
What are the advantages of having the LCD panel on SURETE?
In addition to performing the basic settings on the LCD panel, the SURETE will report some of the system status onto the LCD
panel such as "CPU temperature", configuration, firmware version, event status ¡Ketc. It is very convenient for the system
administrator to realize the major system status without having to go into web-based administration page.
What will SURETE look like after set to "Reset configuration to factory default" within shutdown options?
All of the settings of SURETE will be returned to default value after it has been set to " Reset configuration to factory default ",
which are:
•Server settings: notification level, LCD banner, code page, schedule power-on/shutdown, administration password, time zone,
¡Ketc.
•Network settings: IP relative settings, server/workgroup/domain names, security mode, ¡Ketc.
What are the default values of major settings of SURETE?
The default settings relative to the first time installation are:
1. IP address: 192.168.1.1
2. Domain/Workgroup name: WorkGroup
3. Server name: NASxxxxxxxx
"xxxxxxxx" is the last 8-digit of the MAC address which goes along with each SURETE controller. The MAC address can be found
at either the back of your controller or the tower.
What to do if the administration password of the SURETE is forgotten?
SURETE provides an option to clear the administration password. Please follow below steps to clear you password:
1. Shutdown and turn off your SURETE.
2. Set the DIPswitch located in the power connector of control board to 1:on, 2:on.
3. Power on the SURETE till you see message ¡§Clear Password¡¨ shown in the LCD panel.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais