Ricoh Aficio LD124c Manual do Utilizador descarregar pdf (Página 10)

Scan to E-mail White Paper

4.3 SMTP Authentication via WIM

After entering Administrator mode via the steps outlined in section 4.1 (page 7), the necessary

SMTP Authentication settings can be entered from the E-mail settings page. Follow the steps below

to access and configure the SMTP settings.

1. On the left hand toolbar, click

Configuration.

Under the Devi2. ce Settings heading, select

E-mail to access the e-mail settings.

NOTE

The nav

igation may vary slightly, based

on the version of WIM in use.

3. On the E-mail settings screen, enter

the Administrator’s E-mail address.

TE: Be sure and use a valid e-mail NO

address. Never use admin or administrator as

the e-mail address.

4. Under the SMTP heading, enter the

SMTP IP address or name.

TES: NO

• If DNS is not working properly,

using the server name may cause e-

mail delivery failure.

Use the PING comm• and to find

the server’s IP address (e.g. ping

ricoh.com to find its IP address).

equired, enable SMTP 5. If r

Authentication by selecting On in the

SMTP Authentication field.

6. Enter the SMTP Port number. The entry range is 1 to 65535 (default is 25).

7. If enabling SMTP Authentication, enter the necessary information (E-mail address,

password – up to 63 alphanumeric characters, and User Name – up to 191 alphanumeric

characters).

Click OK to 8. save the settings and return to the MFP Configuration page (Some versions of

WIM may have an Apply button).

Page 10 of 31

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 30 31

Sem comentários

Ricoh Aficio LD124c Manual do Utilizador Página 10