Ricoh FT 1008 Manual do Utilizador

RICOH FT1008/1208OPERATOR’S MANUALRead this manual carefully before you use this product and keep it handy for future reference.For safety. please fol

SAFETY INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5NAME/FUNCTION OF PARTS. .

...USER TOOLS...35-40List of User Tools...

INSTALLATION...14-19Checking the Package Contents...14Unpacking...14Ins

. Be careful not to touch the OPC (Organic Photo Conductor, blue material) insidethe copier.l Do not expose the OPC to light.0Remove all tapes.Remove

Remove the toner cassette from thevinyl bag.l Keep the vinyl bag for repacking.Rock the toner cassette back andforth five or six times.Set the toner c

Pull the paper cassette out.Check the set paper size.If preset paper size is the setting youwant to use, disregard steps @ toIf you need to change the

Attach copy tray as shown 0,then depress it slightly to fix it inplace 0.l Confirm that the copy tray is securely inplace.When you copy onto long-size

Power ConnectionOnly connect the copier to the power source described on the insidefront cover of this manual. Avoid multi-wiring as it could cause an

Notes: Model names for the machines do not appear in the following pages. Checkthe type of your machine before reading this manual.(For details, see p

Auto-off mode- for automatically saving powerTo conserve energy, this copier automatically shifts to the “Auto-off mode” 30minutes after you make a co

Environmental conditions greatly affect the performance of a copier. Besure to choose your installation location carefully.Optimum Setting ConditionsT

PLACEMENT OF ORIGINALS...24Alignment of Originals...24FULL-SIZE COPYING...25Auto Start- Setting Cop

Lift the platen cover.Set the original face down on theexposure glass. Align the center ofyour original with the arrow markon the scale.Lower the plat

To make copies the same size as your originals.Lift the platen cover and place the0original face down on the exposureglass. Align the center of youror

To copy onto paper different from the type in the paper cassette, use thebypass feed.l One sheet should be inserted into the bypass feed at a time.l B

copies are as follows.TransparenciesLetterheadSet the originals and transparencies asshown.l Remove copies delivered to the copy tray one byone.Set th

This manual contains detailed instructions for the operation andmaintenance of this copier. To ensure maximum versatility from thiscopier, all operato

Place the original for the front sideof the copy on the exposure glassand lower the platen cover.l Align the center of the original to thearrow mark o

RECALIBRATING COPY DENSITY . . . . . 34USER TOOLS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35-40List of User Tools. . . . . .

When copies have become unclear or dirty after using the copier for along time, adjust copy density using the image density recalibrationswitch.Slide

The value or mode of the following items can becorresponding User Tool.adjusted with theUser Toolnumber12345678Adjustable item See pageAuto image dens

Adjusting values/modesWhen the desired user tool numberis lit on the copy counter and thePhoto Mode indicator is blinking,enter the required setting u

2. Darker-side manual image density level User mode 2Thedensityrepresented bythe right indicator can be made darker.Default: Normal (Number: 0)Setting

6. Auto reset duration User mode 6As a default setting, the copier will reset itself 1 minute after the finalcopy is made or after the last time any k

Press the Start key. You will findthe second two digits of the totalcopy quantity are displayed on thecopy counter.l Example: When 12345 copies are ma

8PowerConnectionWarningPower [email protected] connect the copier tothe power source describedon the inside front cover ofthis manu

REPLACING THE TONERCASSETTE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42-43Copy Yield.,...43MA

When I.& blinks on the operation panel, it is time to replace the tonercassette (copying is still possible). When I& is continuously displayed

Platen CoverCopy Tray Bypass Feed44

Remove the tool from the transferm0corona wire and store it as shown.l Keep this tool inside the copier.Close the top unit by pressingdown firmly on t

Open the top unit, clean the trans-fer and transport guide plates witha damp cloth, and wipe them witha dry cloth.l If you do not clean the guide plat

llllWhen using transparencies, set one sheet at a time into the bypass feed andopen the copy tray. Remove copies delivered to the copy tray one by one

Replenish toner when replenish toner &I indicator is blinking.When&.I is continuously lit, copies can no longer be made.Before installing a ne

Paper should always be stored properly. Improperly stored paper mightresult in poor image reproduction, creased copies, or paper misfeeds.Generally, a

eUnplugCautionUnplugCaution8CopierLocationCautionWhen you move the copier,unplug the power cord fromthe wall outlet to avoid fireor electric shock.Whe

52Put the toner cassette in a vinylbag.m : To prevent the toner fromspilling out, make sure you seal the vinylbag firmly.Remove the two shipping thumb

-Put the copier in the cardboard-box.l Lift the copier from the bottom asillustrated.-Insert the toner cassette, copy tray,operator’s manual and power

TROUBLESHOOTING...56-57CLEARINGMISFEEDS...58-60When Pz appears on the copy counter...59When & stays on...

Condition CauseRemedySeePagePower cord is not properlyPlug it in firmly.-plugged into the outlet.Nothing happensCheck that the both ends ofwhen the sw

Condition CausePaper does not meetspecification.RemedySpZ;eSet proper paper. Papersize and weight mustcomply with the standards 62set for this copier.

When there is a paper misfeed, the Check Paper Path (& ) indicator orLoad Paper (PE ) indication on the copy counter will light.A1When removing mi

When PE appears on the copy counter:Pull out the paper cassette and0check if paper remains in thecassette.l If the paper cassette has run out of paper

When & is lit:Remove the misfed paper com-wpletely.l If it is difficult to remove the misfedpaper, gently take it out through thecopy tray area.Cl

SPECIFICATIONS...62-6361

*Press this marked1. Main SwitchFor turning copier on/off.2. Exposure GlassPosition originals face down.3. Copy TrayFinished copies are deliveredhere.

ConfigurationCopy ProcessOriginalsMaximum Original SizeCopy Paper SizeBypass Feed Paper SizeCopy Paper WeightDesktopDry electrostatic transfer systemS

Paper CapacityToner ReplenishmentCopy Tray CapacityPower SourcePaper cassette:250 sheets (80g/m2, 20 lb)Bypass feed entrance: 1 sheet ( 180g/m2, 48 lb

In accordance with IS0 Standard 700 1, this machine uses the following symbolsfor the main switch:I means POWER ON.0 means POWER OFF..1ICCDeclaration

SUPPLIES MODEL NAMESThe correct model name of supplies forour machine as listed below.foner cassette Type 1215n Overseas AffiliatesU.S.A.RICOH CORPORA

1. Charge Corona WireIf white streaks appear oncopies, or image density ap-pears uneven, clean this wire.(See page 45.)2. Toner CassetteWhen l&l l

Qpe1&21.Photo Mode Indicator4.Copy Counter2.Auto Image Density5.Start IndicatorIndicator6.StartToner IndicatorKey0 Clear/Stop KeyIndicatorsPath In

12.ReproductionRatio Indicators@@@ @@@@ Reproduction Ratio Indica-tors: Shows the preset repro-duction ratio selected. (See page29.)@ Preset Reduce/En