Press the [ ] or [ ] key to select [Print List/Report], and then press the [OK] key.
Press the [ ] or [ ] key to select [Configuration Page], and then press the [OK] key.
Press [Yes] in the confirmation screen.
Obtaining the wireless LAN information from the configuration page
To configure the wireless LAN settings, the following information is required:
Status•
This appears under Wireless Status.
You can check the wireless LAN connection status.
Communication Mode•
This appears under Wireless Status.
Check that "Communication Mode" is set to "Infrastructure". For details about configuring the
communication mode, see "Connection Problems" in 5, "Troubleshooting".
IP Address•
With the SP 212w/SP 212Nw/SP 213w/SP 213Nw, this appears under Host Interface. With the
SP 212SNw/SP 212SUw/SP 212SFw/SP 212SFNw/SP 213SNw/SP 213SUw/SP 213SFw/SP
213SFNw, this appears under Network Settings.
To change the IP address in the configuration page, For details about configuring the IP address,
see Setup Guide.
Comentários a estes Manuais