Ricoh SP 200N Guia de Instalação Página 1

1Software Installation GuideThis manual explains how to install the software over a USB or network connection.Network connection is not available for

10Selecting [Network Quick Install (DHCP)]1. Turn on the power of the computer.Quit all applications currently running.2. Insert the CD-ROM into the

11Selecting [Network Quick Install (Fixed IP)]1. Turn on the power of the computer.Quit all applications currently running.2. Insert the CD-ROM into

126. Enter the MAC and IP addresses, and then click [OK].To specify these in an IPv6 environment, click [Cancel], and then proceed to Step 8.CTT191MA

13After Installing the SoftwareChecking a network setting listCheck the network setting list to see whether the configured IP address setting has been

143. Changing the IP Address SettingsChanging the IP Address Settings Using the Control Panel (SP 202SN, 203SFN, 203SFNw, 204SFN, 204SN, 204SFNw only)

154. Press the [ ] or [ ] key to select [DHCP Activated], and then press the [OK] key.5. Press the [ ] or [ ] key to select [Off], and then press th

16Changing the IP Address Settings Using the Web Image MonitorWith the SP 200Nw and 201Nw models, select [Wireless LAN] in [LAN Type] to establish the

17Configuring the machine's IPv4 address manually1. Launch Web Image Monitor and log in.2. Click [IPv4].3. Set [DHCP] to [Disable].CTT1674. Sp

18Changing the IPv4 Address Settings Using the Smart Organizing MonitorResetting Network SettingsTo change the IP address after moving the machine or

194. TroubleshootingUSB ConnectionThe USB cable may not be connected properly.Check that the USB cable is connected properly and is undamaged.The CD-R

21. Connecting the Computer and Installing the Software (USB Connection)Connect the machine and computer with the USB cable, and then click [USB Quic

© 2013EN GB EN US EN AU M143-863520

3Quick Install for USBInstalling the software.Do not turn the machine on until you have read how to do so.CTT136Do not connect the USB cable to the ma

45. From the CD-ROM menu, click [USB Quick Install].6. Follow the instructions in the installation wizard.If a message to turn on the power and conn

52. Connecting the Computer and Installing the Software (Network Connection)Network connection is not available for models SP 200/200S/203S/203SF/204

6Before Installing the SoftwareTo install the software over a network connection, a Ethernet cable and the supplied CD-ROM are required. To automatica

7What is a DHCP Server?You can configure settings to automatically obtain the IP address from a DHCP server.A DHCP server is required on the network f

8Printing a network setting listBefore you install the software, print the network setting list to check the network information.It can take up to two

9Quick Install for NetworkFor SP 202SN, 203SFN, 203SFNw, 204SFN, 204SN, 204SFNw models, specify an IP address using the control panel before installin