Ricoh Container Stacker Guia do Utilizador

Container StackerUser’s Guide© 2007 Ricoh Corporation5 Dedrick PlaceWest Caldwell, NJ 07006January 2007337492-005C

4 Container Stacker 1 (including sample tray) Container Stacker 2 (including through-path unit) No. Component Description 1 Small basket Paper Size

5 1.4 Covers Open the Container Stacker covers as shown in the illustrations below. Container Stacker 1 (including sample tray) Container Stacker 2 (

6 1.5 Powering On the Printer 70/92 PPM The location of the printer’s power supply switch is shown below. The marks on the switch represent the charac

7 1.6 Installation Space Requirements Space required for installation of this container stacker is shown below. For safe and comfortable use of this

8 (2) 70/92 + Container Stacker 2 (through-path unit) + Container Stacker 1 (sample tray) HCF Printer Container Stacker 2 Maintenance area Unit : mm

9 (3) 70/92 + Container Stacker 2 (through-path unit) + Advanced Finisher HCF Advanced Finisher Maintenance area Unit: mm Container Stacker 2 Print

10 (4) 184 + Container Stacker 1 (sample tray) Unit: mm Maintenance area Server Container Stacker 1 Printer 00LOG

11 (5) 184 + Container Stacker 2 (through path unit) + Container Stacker 1 (sample tray) Unit: mm Maintenance area Server ＨＣＦContainer Stacker 1 Print

12 (6) 184 + Container Stacker 2 (through path unit) + Standard Finisher Unit: mm Server Maintenance area ＨＣＦStandard finisher Printer Container Stac

13 Section 2. Preparation for Printing 2.1 Summary This section describes the following:  Printer Settings  Stacker Preparation 00LOG

© 2007 Ricoh Corporation. All rights reserved.No part of this document may be reproduced without the expressed permission of RicohCorporation.The mate

14 2.2 Printer Settings 2.2.1 Stacking Mode Short stacking mode lets you limit the amount of paper that can be delivered to the stackers. When the Sho

15 2.2.2 Decurler Function The Decurler function lets you specify if certain paper should pass through the decurler path. The Decurler function has th

16 In order to get your paper to stack properly, follow these simple instructions: 1. Check the characteristics of new paper when characteristics are

17 2.3 Stacker Preparation Place the basket in the container. If you start printing without the basket, or with the basket improperly placed in the co

18 4. Return the drawer unit to the original position and close Front Cover L. Drawer Unit Front Cover L 00LOG

19 Section 3. Removing Paper 3.1 Summary This section describes the following:  Removing Paper From the Container Stacker  Removing Paper From t

20 3.2 Removing Paper 3.2.1 Container Stacker Up to 1500 sheets of paper can be delivered to both the upper and the lower stackers of each container s

21 Remove paper from the basket. Caution! Baskets placed in the Container Stacker must be empty. Loading a basket with paper in it can cause damag

22 3.2.2 Sample Tray Notes: Do not stack more than 100 sheets of paper on the sample tray or a paper jam may occur. (The sample tray does not have a s

23 Section 4. Maintenance 4.1 Summary This section describes the following:  Cleaning 00LOG

iRevisionsRevision Page No. (Contents) DateA Original Release; ECO-1554 October 2004B See ECO-1674 July 2005C Generic Version; Add rev history page,

24 4.2 Cleaning Warning: Be sure to turn off the power switch before cleaning. Tool required: Vacuum cleaner Cleaning cycles: As necessary 1. Op

25 Section 5. Troubleshooting 5.1 Summary This section describes the following:  Paper Jam Recovery  Precautions  Error Codes and Descriptions

26 5.2 Paper Jam Recovery 5.2.1 Component Locations and Error Codes Container Stacker 1 (sample tray) (standard model) When paper remains in the c

27 Paper on paper path 7E1B6 E1B7 Container Stacker 1 + Container Stacker 2 When paper remains in the Container Stacker: Wh

28 Container Stacker 2 + Advanced Finisher When paper remains in the Container Stacker: When a paper jam occurs while printing: Paper on

29 5.2.2 Paper Jam Recovery Paper Jam at Paper Path 2 and 4 1. Open the Front Covers. 2. Open Top Cover 1. Lift the paper guide tab upward and open

30 Open the L paper guide A using the paper guide tab and remove the jammed paper. 4. Turn the knob counterclockwise to discharge the jammed paper

31 Paper Jam at Paper Path 1 and 3 1. Open the front covers. 2. Open the L paper guide B2 using the paper guide tab and remove the jammed paper.

32 3. Open the L paper guide B1 using the paper guide tab and remove the jammed paper. L Paper Guide B1 Paper Guide Tab 00LOG

33 4. Open the L paper guide A using the paper guide tab and remove the jammed paper. 5. Turn the knob clockwise to discharge the jammed paper to

iiiContents Safety Summary Section 1. Summary of the Container Stacker 1.1 Summary ...

34 Paper Jam at Paper Path 5, 6 and 7 1. Open the top covers. 2. Lift the paper guide tab and open the U paper guide C to remove the jammed pap

35 3. Lift the paper guide tab and open the U paper guide A to remove the jammed paper. 4. Open the U paper guide B using the paper guide tab

36 5.3 Precautions Observe the following precautions when using the container stacker:  When paper remains in the basket after a paper jam recov

37 5.4 Error Codes and Descriptions Error Code Error Description E00B Stacker 5 Full Stacker 5 is full of paper. E00C Stacker 6 Full Stacker 6 is

38 E092 Stacker 5 Size Mismatch Basket size of stacker 5 does not match the pick size. E093 Stacker 6 Size Mismatch Basket size of stacker 6 does

39 E1AC CNT.STK Feed Jam 13 Paper did not arrive at paper path sensor 6 of the container stacker. E1AD CNT.STK Feed Jam 14 Paper did not depart fro

40 E29E CONT.ST BUSY Timeout Container stacker is busy continuously. E29F CONT.ST PRINT Timeout Container stacker is in print mode continuously.

41 Appendix A. Specifications A-1 Specifications Specifications are subject to change without notice. Item Specifications Paper size (Container) Sm

42

iv SAFETY SUMMARY General Safety Guidelines  For the safety of personnel and the product, operate the equipment according to the instructions in t

v

1 Section 1. Summary of the Container Stacker 1.1 Summary This section describes the following:  Configurations of the Container Stacker  Compone

2 1.2 Configurations The configurations shown are of the Container Stacker(s) with a 70 ppm printer. The same configurations apply to the 92 and 184 p

3 1.3 Component Locations No. Component Description 1 Sample Tray Holds up to 100 sheets of paper. 2 Top Cover 1 Open this cover if a paper jam