Ricoh Aficio SPC400DN Instruções de Operação descarregar pdf (Página 80)

Configuration

H Enter the channel using {T} or {U}, and then press the {OK} key.

I Set [Communication Speed] in the same way.

The factory default is [Auto Select]. If you need to change the transmitting

speed depending on environment you are using, select the appropriate trans-

mitting speed.

J Print a configuration page to confirm the settings made.

Reference

For details about printing the configuration page, see “Test Printing”,

Quick Installation Guide.

Setting SSID

If [Infrastructure] or [802.11 Ad hoc] is selected for [Communication Mode], set SSID to

use for transmission.

Confirm the network administrator for SSID to use.

A In the [IEEE 802.11b] menu, select [SSID Setting] using {T} or {U}, and then

press the {OK} key.

If an SSID has been set, you can check the SSID setting.

B The message “Enter SSID.” appears. Press [Text].

C Enter characters using {T} or {U}, and then press the {OK} key.

You can switch among upper/lower cases, numeric codes, and symbols by

pressing [ABC/123].

The characters that can be used are ASCII 0x20-0x7e (32 bytes).

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 197 198

Sem comentários

Ricoh Aficio SPC400DN Instruções de Operação Página 80