Ricoh Network Data Protection Unit Type C Manual do Utilizador descarregar pdf (Página 22)

Setting Up

Unpacking

To protect it from shock and vibration during transit, this printer comes packaged

in cushioning foam and secured with tape. Remove these protective materials

after bringing the machine to where it will be installed.

❒ Be sure to remove all four strips of tape from the photo conductor unit to avoid

malfunction.

❒ Removed tape is dirty. Be careful not to let it touch your hands or clothes.

A Remove the plastic bag.

B Position the printer where it is to be used. Lifting the printer requires at

least two people.

Lift using the inset grips on both sides of the printer.

❒ Leave the tape holding the paper feed tray and cover in place while moving

the printer.

❒ Lower the machine slowly and carefully to prevent trapping your hands.

• When lifting the machine, use the inset grips on both sides. The printer

could break or cause an injury if dropped.

• Place no objects on the right cover.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 107 108

Sem comentários

Ricoh Network Data Protection Unit Type C Manual do Utilizador Página 22