Ricoh G112 Instruções de Operação descarregar pdf (Página 233)

Using a Printer Server

233

Using NetWare

This section describes the setting procedure for network printers in the NetWare

environment. In the NetWare environment, you can connect the printer as a

“print server” or “remote printer”.

❖ Setting procedure

• When using the printer as a print server

A Installing SmartDeviceMonitor for Admin

B Setting the network interface board.

C Turning the printer off and then back on.

• When using the printer as a remote printer

A Installing SmartDeviceMonitor for Admin.

B Setting the network interface board.

C Setting NetWare.

D Starting the print server.

❒ This procedure assumes an environment is already prepared for normal Net-

Ware running the printing service setting.

❒ The procedure is explained with the following example settings:

• File server’s name …CAREE

• Print server’s name …PSERV

• Printer’s name …R-PRN

• Queue name …R-QUEUE

❖ Using SmartDeviceMonitor for Admin

To use the printer in a NetWare environment, use SmartDeviceMonitor for Ad-

min to set the NetWare printing environment.

❒ The NetWare Client provided by Novell is required to set the printing envi-

ronment using SmartDeviceMonitor for Admin under the following environ-

ments:

• NDS mode in Windows 95/98/Me

• NDS or Bindery mode in Windows 2000/XP, Windows NT 4.0

For details about installing SmartDeviceMonitor for Admin, see p.168 “In-

stalling SmartDeviceMonitor for Admin”.

1 2 ... 228 229 230 231 232 233 234 235 236 237 238 ... 298 299

Sem comentários

Ricoh G112 Instruções de Operação Página 233